Bradford White Upright Electrical Water Heater 50 Gallon

Bradford White Upright Electrical Water Heater 50 Gallon (189 Liters) 

M-I-50S6DS

Bradford Water Heater Features:

• Bradford White is ISO registered to the 9001-2008 standard.
• UL-174 and IEC Certified.
• Factory Installed Hydrojet® Total Performance System—Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in the tank.
• Vitraglas® Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
• Direct Heat Transfer With Immersed Elements—Transfers heat directly and efficiently to the water. Screw-in style.
• Fully Automatic Thermostat Controls—Fast-acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety.
• Non-Simultaneous and Simultaneous Operation Available— Non- Simultaneous operation (standard) indicates one element at a time is operating. Simultaneous operation means both parts (if equipped) may be used simultaneously.
• Single Phase or Three Phase Operation Available—277V may only be wired for single phase operation.
• Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service.
• Insulation System—1" (25mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity. M-2-80R6DS and M-II-120R have 2" (51mm).
• Water Connections— 3⁄4" (19mm) NPT factory-installed accurate dielectric fittings extend water heater life and simplify water line connections. M-II-120R has 1" (25mm) NPT dielectric waterway fittings.
• Steel Tank—Heavy gauge steel is automatically formed, rolled, and welded to assure a continuous seam for glass lining.
• T&P Relief Valve—Included. All models have special tapping on the top of the tank.
• Low Restriction Brass Drain Valve—Durable tamper-proof design.
• Suitable for residential and light duty commercial applications.

Residential Warranty: 6 or 10 Year Limited Tank Warranty / 1 Year Parts Warranty.

Commercial Warranty: 3 or 5 Year Limited Tank Warranty / 1 Year Parts Warranty.

Technical Specifications

Wattage Limitations for Simultaneous Operation

Wattage Limitations for Non-Simultaneous Operation

GPH Temperature Rise °F

General
All models ETL listed. All water connections, 3⁄4" (19mm) NPT, except M-II-120R, 1" (25 mm) NPT. All electrical connections, 3⁄4" (19mm). All models certified
at 300 psi test pressure (2068 kPa), 150 psi working pressure (1034 kPa). Change suffix number “6” to “10” for warranty identification.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this
system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.